Creality Ender 3 Pro: Use probe for tramming

This commit is contained in:
August 2026-10-04 16:53:47 -04:00
parent e0ceeda9b7
commit 59d60cc148
Signed by: shibedrill
SSH Key Fingerprint: SHA256:M0m3JW1s38BgO2t0fG146Yxd9OJ2IOqkvCAsuRHQ6Pw
5 changed files with 11 additions and 6 deletions

1
.envrc Normal file
View File

@ -0,0 +1 @@
use nix

4
.vscode/settings.json vendored Normal file
View File

@ -0,0 +1,4 @@
{
"nixEnvSelector.nixFile": "${workspaceFolder}/shell.nix",
"nixEnvSelector.useFlakes": false
}

View File

@ -2295,7 +2295,7 @@
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z raise between tramming points
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
//#define BED_TRAMMING_USE_PROBE
#define BED_TRAMMING_USE_PROBE
#if ENABLED(BED_TRAMMING_USE_PROBE)
#define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm)
#define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify

View File

@ -1,5 +1,5 @@
name="Creality Ender 3 Pro"
board="BigTreeTech SKR Mini E3 3.0"
config_version="0.1.0"
config_version="0.2.0"
pio_env="STM32G0B1RE_btt"
fw_ext="bin"

View File

@ -819,7 +819,7 @@
*
* With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
*/
#define PIDTEMPBED
//#define PIDTEMPBED
#if ENABLED(PIDTEMPBED)
//#define MIN_BED_POWER 0 // Min power to improve PID stability (0..MAX_BED_POWER).
@ -2202,7 +2202,7 @@
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
#define AUTO_BED_LEVELING_UBL
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
/**
@ -2223,7 +2223,7 @@
* leveling immediately after G28.
*/
//#define RESTORE_LEVELING_AFTER_G28
#define ENABLE_LEVELING_AFTER_G28
//#define ENABLE_LEVELING_AFTER_G28
/**
* Auto-leveling needs preheating
@ -2268,7 +2268,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
#define G26_MESH_VALIDATION
//#define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.