src/kernel/arch/mod.rs

@@ -15,7 +15,6 @@ compile_error!(
 pub mod x86_64;
 #[cfg(target_arch = "x86_64")]
 pub use x86_64::asm;
-pub use x86_64::startup;
 
 #[cfg(target_arch = "aarch64")]
 pub mod aarch64;

src/kernel/arch/x86_64/gdt.rs

@@ -54,6 +54,7 @@ pub struct Selectors {
     pub sel_kernel_stack: SegmentSelector,
     pub sel_user_code: SegmentSelector,
     pub sel_user_stack: SegmentSelector,
+    #[allow(unused)]
     pub sel_tss: SegmentSelector,
     pub gdt: GlobalDescriptorTable<48>,
 }
@@ -78,7 +79,7 @@ lazy_static! {
         // DO NOT REORDER
         let sel_tss = gdt.append(
             Descriptor::tss_segment(&TSS).set_flags(DescriptorFlags::from_bits_retain(0b1010))
-                .set_access(0b10001011), // This would set the TSS to Busy, but it causes a GPF.
+            //.set_access(0b10001011), // This would set the TSS to Busy, but it causes a GPF.
         );
         Selectors {
             sel_kernel_code: sel_k_cs,

src/kernel/arch/x86_64/interrupts.rs

@@ -23,9 +23,9 @@ lazy_static! {
         // code. The x86_interrupt ABI is always breaking, and this
         // approach will fall apart once multiarch support is re-added.
         unsafe {
-            idt.double_fault.set_handler_fn(double_fault).set_code_selector(SELECTORS.sel_kernel_code);
+            idt.double_fault.set_handler_fn(double_fault).set_code_selector(SELECTORS.sel_kernel_code).set_privilege_level(x86_64::PrivilegeLevel::Ring0);
-            idt.page_fault.set_handler_fn(page_fault).set_code_selector(SELECTORS.sel_kernel_code);
+            idt.page_fault.set_handler_fn(page_fault).set_code_selector(SELECTORS.sel_kernel_code).set_privilege_level(x86_64::PrivilegeLevel::Ring0);
-            idt.general_protection_fault.set_handler_fn(gen_prot_fault).set_code_selector(SELECTORS.sel_kernel_code);
+            idt.general_protection_fault.set_handler_fn(gen_prot_fault).set_code_selector(SELECTORS.sel_kernel_code).set_privilege_level(x86_64::PrivilegeLevel::Ring0);
         }
         idt
     };
@@ -35,7 +35,6 @@ lazy_static! {
 #[allow(dead_code)]
 extern "x86-interrupt" fn double_fault(info: InterruptStackFrame, _: u64) -> ! {
     crate::interrupt::double_fault(format!("{info:#?}"));
-    unsafe { info.iretq() }
 }
 
 #[allow(dead_code)]
@@ -69,13 +68,11 @@ extern "x86-interrupt" fn page_fault(info: InterruptStackFrame, errcode: PageFau
 }
 
 #[allow(dead_code)]
-extern "x86-interrupt" fn gen_prot_fault(info: InterruptStackFrame, error: u64) {
+extern "x86-interrupt" fn gen_prot_fault(info: InterruptStackFrame, _: u64) {
     crate::interrupt::gen_prot_fault(format!(
-        "RIP 0x{:x}, CS {} ({:?}), error: 0x{:x}",
+        "RIP 0x{:x}, CS {} ({:?})",
         info.instruction_pointer,
         info.code_segment.index(),
-        info.code_segment.rpl(),
+        info.code_segment.rpl()
-        error
     ));
-    unsafe { info.iretq() }
 }

src/kernel/arch/x86_64/mod.rs

@@ -8,4 +8,3 @@ pub mod gdt;
 pub mod intel_virt;
 pub mod interrupts;
 pub mod serial;
-pub mod startup;

src/kernel/arch/x86_64/startup.rs

@@ -1,46 +0,0 @@
-use x86_64::{VirtAddr, registers::rflags::RFlags, structures::idt::InterruptStackFrameValue};
-
-use crate::{
-    arch::{
-        asm::ltr,
-        x86_64::{
-            gdt::{SELECTORS, dump_gdt},
-            interrupts::IDT,
-        },
-    },
-    log::{LOGGER, LogLevel},
-    log_info,
-    memory::alloc::format,
-};
-
-pub fn init() -> Result<(), ()> {
-    // Ensure GDT exists
-    SELECTORS.gdt.load();
-    log_info!("GDT loaded!");
-    // Load IDT
-    IDT.load();
-    log_info!("IDT loaded!");
-    x86_64::registers::model_specific::Star::write(
-        SELECTORS.sel_user_code,
-        SELECTORS.sel_user_stack,
-        SELECTORS.sel_kernel_code,
-        SELECTORS.sel_kernel_stack,
-    )
-    .expect("Segment order in GDT is bad");
-    dump_gdt();
-    ltr(SELECTORS.sel_tss.index());
-    Ok(())
-}
-
-pub fn jump_to_usermode(sp: VirtAddr, ip: VirtAddr) -> ! {
-    unsafe {
-        InterruptStackFrameValue::new(
-            ip,
-            SELECTORS.sel_user_code,
-            RFlags::INTERRUPT_FLAG,
-            sp,
-            SELECTORS.sel_user_stack,
-        )
-        .iretq();
-    }
-}

src/kernel/interrupt/mod.rs

@@ -4,8 +4,8 @@
 use crate::log::*;
 use crate::{format, log_error, memory::alloc::string::String};
 
-pub fn double_fault(info: String) {
+pub fn double_fault(info: String) -> ! {
-    log_error!("Double fault: {}", info);
+    panic!("Double fault: {}", info);
 }
 
 pub fn page_fault_fatal(addr: usize, info: String) -> ! {

src/kernel/main.rs

@@ -18,6 +18,7 @@ mod util;
 
 use core::ptr::addr_of;
 
+use arch::x86_64::interrupts::IDT;
 use arch::x86_64::serial::SerialPort;
 use boot::{BASE_REVISION, params, *};
 use constants::*;
@@ -30,10 +31,16 @@ use limine::firmware::{
     FIRMWARE_TYPE_EFI32, FIRMWARE_TYPE_EFI64, FIRMWARE_TYPE_SBI, FIRMWARE_TYPE_X86BIOS,
 };
 use spin::mutex::Mutex;
-use x86_64::VirtAddr;
+use x86_64::{VirtAddr, registers::rflags::RFlags, structures::idt::InterruptStackFrameValue};
 
 use crate::{
-    arch::x86_64::cpuid::{CPUID, virt_supported},
+    arch::{
+        asm::ltr,
+        x86_64::{
+            cpuid::{CPUID, virt_supported},
+            gdt::SELECTORS,
+        },
+    },
     boot::modules::MODULE_RESPONSE,
     memory::paging::active_root_table,
 };
@@ -72,22 +79,31 @@ unsafe extern "C" fn main() -> ! {
             LOGGER.lock().add_device(Box::new(serial_logger));
         }
         log_trace!("Configured kernel logging devices");
-        let log_level = LOGGER.lock().level;
-        log_info!("Log level: {:?}", log_level);
     }
 
     // END OF CRITICAL AREA
     // Fallible code can be placed below this comment
 
-    let _ = arch::startup::init();
     // Initialize all statics so the bootloader memory can be reclaimed
     memory::init_statics();
 
+    // Ensure IDT exists
+    SELECTORS.gdt.load();
+    log_info!("GDT loaded!");
+    IDT.load();
+    log_info!("IDT loaded!");
+
     log_info!(
-        "Boot cmdline: {} {}",
+        "Kernel cmdline: {}",
-        EXECUTABLE_FILE_RESPONSE.executable_file().path(),
         EXECUTABLE_FILE_RESPONSE.executable_file().cmdline()
     );
+    log_info!(
+        "Kernel file path: {}",
+        EXECUTABLE_FILE_RESPONSE.executable_file().path()
+    );
+
+    let log_level = log::LOGGER.lock().level;
+    log_info!("Log level: {:?}", log_level);
 
     // Branding
     for line in ASCII_LOGO {
@@ -165,23 +181,60 @@ unsafe extern "C" fn main() -> ! {
     }
     log_info!("Virtualization provider: {:?}", virt_supported());
 
-    let root_ptable_info = unsafe { active_root_table() };
+    {
-    log_info!(
+        let root_ptable_info = unsafe { active_root_table() };
-        "Root page table is Level {} at 0x{:x}",
+        log_info!(
-        root_ptable_info.1,
+            "Root page table is Level {} at 0x{:x}",
-        addr_of!(*root_ptable_info.0) as usize
+            root_ptable_info.1,
-    );
+            addr_of!(*root_ptable_info.0) as usize
+        );
+        // This is an expensive function. Only run it if we're actually logging the results.
+        //let loglevel = LOGGER.lock().level;
+        //if loglevel <= LogLevel::Trace {
+        //    paging::walk_tables();
+        //}
+    }
 
     if let Some(modules_list) = *MODULE_RESPONSE
         && modules_list.modules()[0].path().ends_with("/userboot.bin")
     {
         let ub = modules_list.modules()[0];
         log_info!("Found userboot: {} {}", ub.path(), ub.cmdline());
-        // TODO: remap userboot as user pages
 
-        let start_addr = VirtAddr::from_ptr(ub.data() as *const [u8]);
+        //let start_addr = VirtAddr::from_ptr(ub.data() as *const [u8]);
-        arch::startup::jump_to_usermode(VirtAddr::new(0xfffffff800000000), start_addr)
+        let start_addr = VirtAddr::from_ptr(usermode_fn as *const fn());
-    } else {
+        log_info!("Start address: 0x{:x}", start_addr);
-        panic!("Userboot not found, cannot boot!");
+
+        x86_64::registers::model_specific::Star::write(
+            SELECTORS.sel_user_code,
+            SELECTORS.sel_user_stack,
+            SELECTORS.sel_kernel_code,
+            SELECTORS.sel_kernel_stack,
+        )
+        .expect("fuck");
+        ltr(SELECTORS.sel_tss.index());
+        unsafe {
+            InterruptStackFrameValue::new(
+                VirtAddr::from_ptr(usermode_fn as *const fn()),
+                SELECTORS.sel_user_code,
+                RFlags::INTERRUPT_FLAG,
+                VirtAddr::new(0xffffffff80000000),
+                SELECTORS.sel_user_stack,
+            )
+            .iretq();
+        }
+    }
+
+    // TODO:
+    // - Map APIC
+    // - Create an interrupt stack frame, push it to stack, and iret to userboot
+
+    panic!("Finished boot, but cannot start init because processes not implemented!");
+}
+
+fn usermode_fn() -> ! {
+    log_info!("In usermode!");
+    loop {
+        arch::asm::nop();
     }
 }